Analisis Efisiensi Penanggulangan Lost Circulation Dengan Metode Konvensional dan Under Balanced Drilling Pada Formasi Kujung Blok Z

Authors

  • Rifaldy Prasetya Cia Sekolah Tinggi Teknologi Minyak dan Gas Bumi Balikpapan
  • Joko Wiyono Sekolah Tinggi Teknologi Minyak dan Gas Bumi Balikpapan
  • Abdi Suprayitno Sekolah Tinggi Teknologi Minyak dan Gas Bumi Balikpapan
  • Desianto Payung Battu Sekolah Tinggi Teknologi Minyak dan Gas Bumi Balikpapan
  • Abdul Gafar Karim Sekolah Tinggi Teknologi Minyak dan Gas Bumi Balikpapan
  • Dwiki Ganang Wicaksono Sekolah Tinggi Teknologi Minyak dan Gas Bumi Balikpapan
  • Pratama Bagus Restu Sekolah Tinggi Teknologi Minyak dan Gas Bumi Balikpapan

DOI:

https://doi.org/10.53866/jimi.v3i4.164

Keywords:

lost circulation, Unbalanced Drilling, conventional methods, drilling efficiency, Kujung formation

Abstract

This study will analyze the efficiency of conventional methods and Unbalanced Drilling (UBD) in addressing lost circulation in Kujung Block Z formation. Lost circulation is one of the major challenges in drilling operations that can lead to operational risks and increased costs. This study compares the effectiveness of the two methods based on operational parameters such as rate of penetration (ROP), drill bit load (WOB) and formation pressure stability. The results of this study show that the UBD method is more effective in suppressing lost circulation compared to conventional methods, especially under extremely low formation pressure conditions.

References

Aadnoy, B. S. (2010). "Modern Well Design." CRC Press.

Bourgoyne, A. T., Chenevert, M. E., Young, F. S., & Hudgins, R. R. (1986). "Applied Drilling Engineering." Society of Petroleum Engineers.

Adams, N. J. (1985). "Drilling Engineering: A Complete Well Planning Handbook." PennWell.

Rabia, H. (1986). "Oilwell Drilling Engineering: Principles and Practice." Graham & Trotman.

Mitchell, R. F. (2011). "Advanced Well Control." SPE Textbook Series.

Grace, R. (2003). "Blowout and Well Control Handbook." Gulf Professional Publishing.

Guo, B., Ghalambor, A. (2005). "Natural Gas Engineering Handbook." Gulf Professional Publishing.

Lyons, W. C. (1996). "Standard Handbook of Petroleum and Natural Gas Engineering." Gulf Professional Publishing.

Moore, P. L. (2011). "Drilling Practices Manual." PennWell.

Hossain, M. E., Al-Majed, A. A. (2015). "Fundamentals of Sustainable Drilling Engineering." Wiley.

Economides, M. J. (1998). "Petroleum Production Systems." Prentice Hall.

Nelson, E. B. (1990). "Well Cementing." Schlumberger.

Chilingarian, G. V., & Vorabutr, P. (1983). "Drilling and Drilling Fluids." Elsevier.

McCray, A. W. (1974). "Well Cementing Practices." Gulf Publishing.

API (2009). "Recommended Practice for Well Control Operations." American Petroleum Institute.

Smith, P. C. (1993). "Well Control Manual." Elsevier.

Ma, T. (2017). "Underbalanced Drilling: Limits and Extremes." Elsevier.

Wang, J. (2018). "Wellbore Stability Analysis." Springer.

Rehm, B., & McClellan, P. (2014). "Underbalanced Drilling Handbook." PennWell.

Allen, T. O., & Roberts, A. P. (2005). "Production Operations." PennWell.

Azar, J. J., & Samuel, G. R. (2007). "Drilling Engineering." PennWell.

Bradley, H. B. (1992). "Petroleum Engineering Handbook." SPE.

Bassiouni, Z. (1994). "Theory, Measurement, and Interpretation of Well Logs." SPE.

Rider, M. (2002). "The Geological Interpretation of Well Logs." Rider-French.

Darley, H. C. H., & Gray, G. R. (1988). "Composition and Properties of Drilling and Completion Fluids." Gulf Professional Publishing.

Ariyani, D., Megawati, E., Ira, P., Sadesi, A., & Sugiarto, M. A. (n.d.). PEMBUATAN BIODIESESL DAN PENGARUH JENIS PELARUT DAN MASSA BIJI TERHADAP % YIELD EKSTRAK MINYAK BIJI KETAPANG (Terminalia catappa Linn).

Jalisar Belo, J., Maulinda Ulfah, B., Jalu Waskita, K., Sera Afifah, R., Studi Teknik Perminyakan, P., Tinggi Teknologi Migas, S., & Studi Rekayasa Geologi, P. (2025). STUDI LABORATORIUM PENGARUH PENAMBAHAN SERBUK KOPI TERHADAP RHEOLOGY LUMPUR DAN FILTRATION LOSS. In PETROGAS: Journal of Energy and Technology (Vol. 7, Issue 1).

Program Studi Teknik Industri, D., Tinggi Teknologi Migas Jalan Soekarno Hatta, S. K., & Karang Joang, K. (2022). PENGARUH TOTAL QUALITY MANAGEMENT TERHADAP BEBAN KERJA PEGAWAI DI SEKOLAH TINGGI TEKNOLOGI MIGAS DI BALIKPAPAN. PETROGAS, 4(1).

Susanto, H., & Rasminto, dan. (n.d.). KECERDASAN EKOLOGIS BERBASIS KEARIFAN LOKAL. In PETROGAS (Vol. 5, Issue 1).

Downloads

Published

2023-12-30

How to Cite

Cia, R. P. ., Wiyono, J. ., Suprayitno, A., Battu, D. P. ., Karim, A. G., Wicaksono, D. G. ., & Restu, P. B. (2023). Analisis Efisiensi Penanggulangan Lost Circulation Dengan Metode Konvensional dan Under Balanced Drilling Pada Formasi Kujung Blok Z. Citizen : Jurnal Ilmiah Multidisiplin Indonesia, 3(4), 294–297. https://doi.org/10.53866/jimi.v3i4.164

Issue

Vol. 3 No. 4 (2023): CITIZEN: Jurnal Ilmiah Multidisiplin Indonesia

Section

Articles

License

Copyright (c) 2023 Rifaldy Prasetya Cia, Joko Wiyono, Abdi Suprayitno, Desianto Payung Battu, Abdul Gafar Karim, Dwiki Ganang Wicaksono, Pratama Bagus Restu

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.